Vox Bobcat S66 Reissue Guitars - Black, Sunburst and Red
1967 Vox Bobcat Guitar
Vox offered an incredible assortment of guitars during the mid to late 1960s. In addition to producing guitars that were unmistakenly their own design such as the Phantom and Teardrop, Vox also offered guitars that resembled popular models produced by Fender and Gibson. The original Vox Bobcat, shown at left and offered in 1966 and 1967, was clearly a Gibson knockoff.
During this time frame, Vox contracted with Crucianelli and Eko in Italy to produce their semi-acoustic models. While a majority of Bobcat production came from Eko, a Bobcat produced by Crucianelli, with it's characteristic "bat wing" pickguard, can be seen in the 1966 Thomas Vox fold out catalog.
The semi-acoustic, double bound body of the 1960's era V219 Vox Bobcat by Eko had a thick poly finish. The original Bobcat had three single coil pickups with white rectangular plastic covers and a kidney shaped pickguard with an engraved "Vox Bobcat" inscription. It also featured a hinged vibrato tailpiece, a three position pickup selector switch and four rotary controls with knurled aluminum control knobs. The bolt-on, removable neck featured Eko open-gear tuning machines. The neck included the Eko exclusive "Double T" aluminum extrusion plus an adjustable truss rod. A vertical Vox logo was engraved into the headstock. The Bobcat retailed for $330 in 1966, or about $2600 adjusted for 50+ years of inflation.
Like the original Bobcat, the 2020 Vox Bobcat S66 reissue featured a poly finished double bound semi-acoustic body. The Bobcat S66 added a center block to control feedback. The Bobcat S66 also had three single coil pickups with white rectangular plastic covers. It as well included a kidney shaped pickguard with a "Vox Bobcat" inscription. The first edition Bobcat S66 reissue had a simple, non-vibrato trapeze tailpiece but the Bobcat S66 Bigsby featuring a Bigsby B70 vibrato tailpiece was introduced in January 2021. Tone selection was facilitated by a three position pickup selector switch, two volume and two tone controls topped with knurled aluminum knobs. Unlike the original Bobcat, the reissue Bobcat S66 had a set-in neck with a standard truss rod and premium open gear tuners from Grover. The neck was ~1.7" wide at the nut. The Bobcat S66 retailed for $1849.99 and was made in Korea.
The images and editorial content in this web site may not be copied or reproduced
in online auction sites such as eBay, Reverb and Craig's List. Sellers may provide a link
to the Vox Showroom web site if they wish to refer to this copyrighted material.